Clamping

Grid List

Set Descending Direction

1-10 of 35

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. Woodpeckers Clamp Cart


    Roll all your clamps right up next to your work with Woodpeckers new Clamp Cart. The A-frame design holds up to 50 clamps of various sizes and styles – from 4' bar clamps to 4" C-clamps. The formed steel cross-struts bolt solidly to the frame, eliminating rack. We use heavier gauge steel than any competitive clamp cart, then apply a tough powder-coat finish instead of a thin film of spray paint. The heavy-duty casters far exceed the capacity needed for a rack full of the heaviest clamps. One pair of casters lock, to keep the Clamp Cart from moving around on you once you get it in place.

    Sale Pricing ends November 5, 2019.

    Learn More
  2. 2096 WORKHOLDING KIT

    If you agree that the simplest solution is usually the correct solution, you’ll love Woodpeckers 2096 Workholding Kit. Few things are simpler than two opposing wedges, and that’s one of the principles behind this kit. With one wedge fixed, the opposing wedge can apply amazing gripping strength with the tiniest application of pressure. When you’re done and ready for the next piece, a simple tap on the narrow end of the floating wedge and it’s free. Another simple approach is a bench stop or “dog” with a fixed height…no springs, no clamps, just a shoulder that keeps it in place. The kit has a gaggle of them. “2096” refers to the spacing on Festool MFT tables…20mm holes machined on 96mm centers. We designed the kit around the MFT, but if you don’t have one, don’t worry. With Woodpeckers Hole Boring Jig (sold separately) you can make your own table tops with the exact same spacing pattern and hole size.

    Learn More
  3. Woodpeckers  BC4-M2 Box Clamp

    Clever Casework Clamps Speed Assembly And Square Your Work

    Like Having an Extra Pair of Hands. With our M2 Box Clamps you can glue-up or dry-fit any 90° joint quickly and easily and know your joint is square. Just position the clamp in a corner, give the knob or bolt a twist and equal pressure is applied to both parts while instantly squaring the joint. It’s that simple. And, our new, easy setup feature with stock thickness dimensions called-out on the clamp body means you can quickly adjust our Box Clamps to fit your stock dimensions in seconds.

    Learn More
  4. Clamping Squares PLUS  & CSP Clamps

    Keep large panel projects perfectly aligned while you install fasteners, add additional features, or simply visualize your design. Woodpeckers new Clamping Square Plus is longer, wider and stronger than our original design, giving you better performance for the same price. In our new CSP design we incorporated a series of 3/8” holes, then designed our new CSP Clamp to drop easily into any of the holes and secure the square faster and easier than separate “F” or “C” style clamps. After we finished the CSP Clamps it occurred to the team that you would need a place to keep all these squares and clamps handy, so we came up with the CSP Clamp Rack-It. It’ll keep your squares and clamps right where you need them. 

    Learn More
  5. MCT - Miter Clamping Tool

    End the Battle of the Creeping Joint - Clamp Miter Joints Accurately and Effectively.


    Clamping miter joints with bar clamps usually ends up as a frustrating tug-of-war…putting too much pressure on one clamp, causing the joint to slip out of alignment, only to repeat the mistake on the opposing corner. There are specialized clamps out there for the job, but they limit the width of your stock, and if your shop is like mine, they’re always an eighth of an inch too small.

    Learn More
  6. Woodpeckers Clamp Rack-It ™

    Store More Clamps in Less Space with Clamp Rack-It


    Woodpeckers new Clamp Rack-It™ saves valuable shop wall space by fitting 6 parallel jaw clamps into the space previously taken up by just two. The rack halves are just a fraction over 1-1/2” apart and 12 inches deep, giving you plenty of room for heavy duty parallel jaw clamps. Not only does Clamp Rack-It™ save space, it's also the easiest-to-install clamp rack on the market today. Two lag bolts (included) install each rack.

    Learn More
  7. 4" Box Clamp

    You can never have enough wood clamps. But then again, having just the right wood working clamp for the job can make a huge difference. The new Woodpecker 4” Box Clamp might just be the perfect wood clamp for assembling your cabinets, drawers and virtually any other box made from 1/4” to 1” thick material even with two pieces of different thickness (up to 1/4” difference).

    Learn More
  8. Miter Clamp Set 2-Pack

    Here's a trick solution to clamping a miter; two mating blocks requiring only one clamp to provide equal pressure on four surfaces simultaneously.

    QUANTITIES LIMITED - NO PHONE ORDERS PLEASE!

    Learn More
  9. Knuckle Clamps

    Woodpeckers Knuckle Clamps provide versatile gripping with no slipping!

    Woodworkers are an innovative bunch. We enjoy the challenge of solving problems and devising ways to do things easier, faster and better. Our new Knuckle Clamp is the latest example of this inventive drive. Many woodworkers have already enjoyed the quick-clamping action that's possible when you combine pivot-style hold-down clamps with aluminum T-tracks installed on jigs, router tables and workbenches. Woodpeckers Knuckle Clamps take this clamping capability to a new level.

    Learn More
  10. Woodpeckers Clamp Rack-It ™ System


    Every woodworker has heard (or given) the same advice, “You can never have too many clamps.” But what are you supposed to do with all those clamps once you have them in your shop? You need them accessible, organized and condensed in as tight a space as possible. Here’s just the system you need to accomplish that, regardless of your clamp size, style or how many you have.

    Learn More

Grid List

Set Descending Direction

1-10 of 35

Page:
  1. 1
  2. 2
  3. 3
  4. 4

CLAMPING TOOLS AND ACCESSORIES FOR WOODWORKING

After all the hours you spend preparing your project, don’t struggle when it’s time to put it all together. Woodpeckers makes box clamps, clamping squares and miter clamping tools to help with glue-up and assembly. We also make hold-downs, knuckle clamps, multi-knobs and t-track for work-holding at the drill press, workbench and in your jigs and fixtures. When you’re done with your project, we have storage solutions for all your wood clamps with our storage racks, Clamp Rack-It and Clamp Rack-It System. Beyond what we manufacture, we offer great deals on woodworking clamps, vises and workholding devices from Bessey, Dubuque, Bora and other quality manufacturers.