MCT - Miter Clamping Tool Open Box
Woodpeckers Miter Clamping Tools direct clamping pressure straight across the miter joint, pulling the joint together, instead of letting the 45° miters slip. With two sizes to choose from, they work with any stock width and thickness, from tiny cove molding to the largest picture frame stock. Just clamp a block to each joining workpiece then place a third clamp across the joint from block to block. The vee sections in the clamping blocks ensure the third clamp is applying its pressure directly across the joint.
End the Frustration of Clamping Miter Joints with Bar Clamps
Clamping miter joints with bar clamps usually ends up as a frustrating tug-of-war…putting too much pressure on one clamp, causing the joint to slip out of alignment, only to repeat the mistake on the opposing corner. But the Miter Clamping Tools eliminate the slip and get your frame assembled quickly and accurately.
Woodpeckers makes the Miter Clamping Tools from aircraft grade aluminum, with generous ribbing to add strength. Softened ridges in the face won’t mar your stock, even when heavy clamping pressure is needed. The anodized surface sheds most adhesives and finishes.
If you’re working with stock from ½” to 1”, use the MCT-75 (3/4” thick). For thicker stock, choose the MCT-150 (1-1/2” thick). A pair of clamping blocks lets you put together one corner at a time or get the 8-pack and assemble all four corners at once.
Like all Woodpeckers products, the Miter Clamping Tools are precisely machined and carefully inspected in our Strongsville, Ohio facility (just south of Cleveland).
Protected by US PATENT No.D899,883 & D929,839.
| Country of Manufacture | United States |
|---|
