- Description
-
Details
If you use knobs to lock the hex head bolts instead of hex nuts, you can easily adjust the position of SUPER TRACK.
SUPER TRACK can be used horizontally, vertically, on top of or and embedded in a jig, fixture or work bench.
SUPER TRACK can be cross cut with any carbide tipped blade. The ideal blade has a negative rake, triple chip grind, similar to a laminate cutting blade. A limited number of cuts can be made with an ATB tooth pattern. Cut slowly, ensure at least (3) teeth are in material at all times and use some kind of lubricant. Specific lubricants for cutting aluminum are available. Shop your local hardware store. Aluminum cutting lubricant is like a wax in a stick form.
And of course, WEAR FULL COVERAGE GOGGLES, LONG SLEEVES AND AN APRON.
- Additional Information
-
Additional Information
Country of Manufacture United States UPC No Manual No - Prop 65 Warning
-
Prop 65 Warning
You may also be interested in the following product(s)
-
Hold Down Clamp, Pivot, Non-Slip
$11.99 -
Woodpeckers 1/4" T-Track
Starting at: $9.99
-
Dual Purpose Track
Starting at: $18.99
-
Woodpeckers Combo Track
Starting at: $19.99
-
Hex Head Bolts
Starting at: $1.75
-
Knuckle Clamps
Starting at: $17.99