1/4" Diameter Solid Carbide Flush Trim Compression Router Bits, 2+2 Flute, 1/4" Shank
When your template routing project involves plywood, you need a router bit designed with plywood in mind and when the pattern includes small inside radius corners, you need a 1/4" diameter. Our Compression Bits combine the best of both Up-Cut and Down-Cut designs. Up-Cut bits clear the shavings most efficiently, but can chip the top edge of the cut in plywood. Down-Cut bits leave a beautiful edge on the top surface, but can tear out the bottom edge. On a Compression Bit, the first 1/4" is Up-Cut with the remaining cutting length Down-Cut. The shearing action is always toward the center of your material. Twin bearings mounted very close to the cutting edge guide your cut along a template or substrate material.
American-Made Quality at Factory Direct Pricing
Woodpeckers makes Ultra-Shear 1/4" Compression Flush Trim Bits in three cut lengths; 1", 1-1/4", and 1-1/2". Use the one closest to the thickness of your material. Don’t settle for inferior quality imported bits to save money. Woodpeckers uses state-of-the-art CNC grinding equipment, the highest quality solid carbide blanks and ultra-fine grinding wheels to produce American-made router bits at extremely competitive prices. The days of paying extra for middle-man markups are over. Buy direct from the manufacturer and pocket the savings.
Like all Woodpeckers products, Ultra-Shear Solid Carbide Spiral Compression Flush Trim Bits are made right here in our Strongsville, Ohio, facility just south of Cleveland. We’re confident you won’t find an American-made bit of the same design for less.
*NOTE: The Buy 2 or More Savings is offered when 2 or more of the same Bits are purchased.
|Country of Manufacture||United States|
WARNING: Wood Dust created by Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.