Semble Stock Your Shop 18-Clamp Set

When you’re ready for better, reach for Semble Woodworking Clamps.

Entire set includes:

(2) 12” LD Parallel Jaw Clamps

(2) 6” LD Parallel Jaw Clamps

(2) 24” One-Handed Bar Clamps

(2) 18” One-Handed Bar Clamps

(2) 12” One-Handed Bar Clamps

(2) 6” One-Handed Bar Clamps

(2) Ratcheting Track Clamps

(4) Ratcheting Clamps

Semble LD Parallel Jaw Clamps

Do you build furniture and smaller, delicate casework? If so, this is bound to become one of your favorite clamps. The Semble Light Duty Parallel Jaw Clamp delivers 440 pounds of clamping pressure, distributed uniformly over the jaws. That evenly applied power is delivered by a clamp that is light, nimble and easy to position. The sliding jaw of the SEMBLE LD Parallel Jaw Clamp won’t free fall when used (or carried) vertically. Push the handle slightly toward the rail to move it toward the fixed jaw. Pull it slightly away from the rail to slide it away from the fixed jaw. In the center, it stays just where you put it. The wide footprint of both fixed and sliding jaws provide a stable base for the clamps on your bench. The 3-inch-long dual-durometer contoured handle ensures a powerful non-slip grip. Instead of dimpling the end of the rail and making the sliding jaw a permanent fixture, SEMBLE uses a removable stop. Now you can remove the sliding jaw, reverse it, and use the clamp as a spreader. The stop does double-duty, also supporting the bar on your bench when working on your assembly. The jaws are 1-1/8” wide by 4-3/8” long with 3-1/8" throat depth. The 3/4" x 13/64" rail is zinc-coated.  That means glue squeeze-out pops right off after it dries and the bar resists corrosion, even in basement shops.

Semble Ratcheting Track Clamps

Perforated bench tops and track saws have revolutionized the way many of us approach woodworking. Here’s a clamp built for both jobs. This specialized ratcheting “F” clamp fits in the 12mm x 8mm t-slot of most track saw rails (Festool, Makita, Triton and some others). It’s perfect to secure the rail while you cut your sheet goods. The arm is also just the right length to thread through a 20mm (or 3/4") hole in a bench top to hold your work down to the table. The quick acting ratchet handle with a non-marring jaw pad makes simple, easy, and safe to clamp your work… and with the quick-release trigger, you won’t waste any time adjusting.

 Semble One-Handed Bar Clamps

Quick, easy, powerful clamping, the Semble One-Handed Bar Clamp is unlike any other when it comes to its design and performance—not to mention the great price, too. Featuring a nylon composite clamp body with ergonomic, TRP grip handles, a strengthened carbon steel rail, non-marring grip pads, and quick-release lever. The versatility of these clamps is something you just can’t pass up—as a clamp and spreader all in one, the range of tasks you can tackle makes these a must-have for any hardworking shop. The Semble One-Handed Bar Clamps have a max clamping force of 330 lbs and a jaw depth of 3-3/8”.

 Semble 4” Ratcheting Clamps

The Semble 4” Ratcheting Clamp is packed with plenty of great features, and all you need is a single hand to apply its powerful (and adjustable) clamping force. The ratcheting mechanism keeps you in control of your pressure and its quick release lever lets you instantly readjust your position or remove. The vee-grooved, swiveling jaw pads are non-marring and easily conform to round or curved stock. Last but not least, you’ll always have a solid, no-slip grip with the ergonomic, textured handles.