Router Lifts & Plates

Grid List

Set Descending Direction

7 Item(s)

  1. PRL V2 (Precision Router Lift)

    The Precision Router Lift V2 (PRL-V2) combines the best in router lift technology. The PRL-V2 is manufactured entirely in the U.S.A by Woodpeckers.

    Learn More
  2. Downdraft Dust Cabinet
    Enhance your work environment and add years to your router’s life with Woodpeckers new Downdraft Dust Cabinet. Porting the dust out the back of the fence gets a good portion of the chips off most routing operations, but the dust that does go down works its way into the motor windings and spindle bearings of your router. The Downdraft Dust Cabinet completely encloses your router and has a 4" port out the rear. It captures almost everything not caught up top and keeps your router clean and cool. The Downdraft Dust Cabinet is sized and shaped to fit even the largest routers on the market. Mounting it to a Woodpeckers Router Table requires no drilling, and mounting it to any other router table requires just a few simple screw holes. Learn More
  3. Cast Aluminum Router Mounting Plate
    If you're looking for the highest quality router plate money can buy, you found it.

    The Woodpecker Cast Aluminum Router Plate is stronger, stiffer and less prone to warp or flex then other aluminum, polycarbonate or acrylic router plates. In addition, its durable, low friction anodized coating makes it easier and smoother for wood to glide across. Although this fixture grade material is more expensive, its numerous advantages make it well worth the few extra dollars for what typically is a one time purchase.

    Learn More
  4. 8-PC Twist Lock Ring Set, Molded
    For ideal stock support, it's recommended that the router bit opening be approximately 1/8" to -1/4" larger than the bit diameter. This clearance is enough to allow for air flow as well as stock support while routing. This set of eight is in addition to the standard three rings supplied with each Woodpeckers Router Mounting Plate and Router Lift. They come in a handy MDF stand with a total of ten slots. The two additional slots hold the two standard rings that you're not using. Learn More
  5. Porter-Cable 7518-2 Router Motor Only
    In most cases, table mounted routers stay in the table. Now you can buy just the Porter-Cable 7518 motor without paying for the base that's likely to never be used. Includes ½” collet and bit changing wrenches. Combine this motor with any compatible Woodpeckers Router Lift and you have the perfect router table set up. Learn More
  6. Router MDF Insert Plate Template
    Making your own table? Want an easy way to make a perfect cutout for one of a Woodpecker router plates or router lift? Here's the answer. With this template and a template router bit (one with a bearing on the shank), anyone can rout out a perfectly sized 9-1/4 x 11-3/4 opening. CNC machined from 3/4" MDF for a perfectly smooth bearing surface and large enough for clamps. Useable for at least a dozen openings. Learn More
  7. Free Hand Guard
    If you're doing free hand routing, you know how tricky it can be to start the cut. Router bits tend to spin the board and gouge the wrong edge when you start the cut. This often results in damage to your carefully shaped furniture parts. Starting Pins can help you gain control but don't offer dust collection or protection from flying chips. The new Woodpecker Free-Hand Guard does all these things in a well built, high quality form. Learn More

Grid List

Set Descending Direction

7 Item(s)