Precision Router Lift V2
The Precision Router Lift V2 (PRL-V2) combines the best in router lift technology. The PRL-V2 is manufactured entirely in the U.S.A by Woodpeckers.
This new router lift features the proven robust construction of the Precision Router Lift combined with the near instant elevation changes of the Quick Lift.
Another innovation is the micro-adjust thumb wheel. This improvement eliminates the need for a crank handle to make precise router bit height adjustments. When combined with the ability to make near instant coarse height adjustments, you'll quickly discover just how easy table mounted routing can be.
With a newly designed spring-assist lift wrench, you can go from routing height to bit changing height in 2 seconds even when lifting the heaviest of routers.
Like Woodpeckers other router lifts, the PRL-V2 includes an adjustable reference scale. Tool-less scale adjustments can be set to zero from any bit position then incremented to intervals as small as .002”. One complete revolution equals 1/16” in height change.
Like our entire top-of-the-line aluminum router mounting plates, the V2 plate has eight easily accessible leveling screws, adjustable side plungers, solid brass starting pin and three Twist Lock rings.
The PRL-V2 comes standard with (1) set of motor pads, available for the following:
- Bosch 1617,- 1618
- Craftsman 17542, 17540,- 28190
- Dewalt 618
- Porter Cable 7518
- Porter Cable 690, 890, 1617, 1618
- Milwaukee 5625-20
- Portamate Router
NOTE: PRL-V2 models shipped before 11/24/08 may not be compatible with the Milwaukee 5625-20. To verify, check the date engraved in the end of the carriage, just to the side of the ¾" hole. The date needs to be 10-17-08 or later to be compatible.
CLICK HERE FOR PROPOSITION 65 WARNING.
Download PRl-V2 instruction - click here.
Download service notes here
* Above the table bit changes with the Bosch 1617/1618, and the PC 690 are not possible without a collet extension or offset wrenches.