MICROJIG FitFinder 1/2 Gauge
The FITFINDER 1/2 Gauge allows you to find the 1/2 thickness of any material up to 3" thick in just seconds. Create perfectly fitting joints with zero guesswork, set fences, and transfer cutting depths instantly—all with no math or measuring.
Find 1/2 thickness of material in seconds—no math or measuring required.
The FITFINDER 1/2 Gauge automatically finds the center of your workpiece using simple geometry. Lock the measurement in place and set the cutting depth of your saw blade/router bit, or set fences.
- Match the material's thickness - Place material under P2, then lower P2 so that it rests on top of the material.
- Find the 1/2 point - The bottom of P3 automatically adjusts to exactly 1/2 the thickness of the material.
- Transfer measurement - Lock in the measurement and use the FITFINDER to set cutting depths and fences.
Use it around your shop.
Set fences for resawing.
Set fence position and resaw material on the bandsaw with zero guesswork.
Center stock on the lathe.
Find the center of stock and mount material on the lathe for safer spindle turning.
Set precise cutting depths.
Lock in the measurement and transfer to the router or table saw to set cutting depth for flawless lap joints.
Center router bits.
Quickly and accurately find the halfway point of material.
Perfectly fitting joints. Zero guesswork.
Overlap Joints, Half Lap Joints, Rail & Stile Joints, and more!
Country of Manufacture | Taiwan, Province of China |
---|
WARNING: Wood Dust created by Drilling, sawing, sanding or machining wood products can expose you
to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or
use a dust mask or other safeguards for personal protection.
https://www.p65warnings.ca.gov/fact-sheets/wood-dust