Magswitch Pro Vertical Featherboard


improve your cutting results by holding down materials to ensure productivity on a table saw or bandsaw with the Magswitch Pro Vertical Featherboard. This table saw safety attachment pushes the workpiece down against the table during feeding to prevent ride-up and kickback while improving your cutting results and productivity. The feathers adjust vertically to match the height of your workpiece, and can be paired with a second Pro Vertical Featherboard for downward pressure on a work piece before and after the saw blade.

Magswitch Pro Vertical Featherboard

Improve your table saw efficiency and safety with the Magswitch Pro Vertical Featherboard.

A table saw attachment that provides downward pressure to prevent workpieces from ride-up

  • Anchors to table saw for fences to provide downward pressure on work pieces as it is cut on the table saw to ensure that thin material does not bend and lift of the table.
  • Ensures that non-through cuts are a consistent depth.
  • Reversible for functionality on either side of the work piece.
  • Configured to clamp to the center of a steel table saw fence or at any point on the steel table top.
  • Compressible gaskets provide excellent grip when magnets are engaged.
  • Broadly compatible with different fence sizes.
  • Multiple tools interlock together if downward force is needed at multiple points.
More Information
Country of Manufacture United States

WARNING: Wood Dust created by Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.


  • Nominal Max Breakaway Force: 150 lbs/ 68 kg
  • Nominal Maximum Shear: 40 lbs / 18 kg
  • Net Weight: 1.4 lbs / 0.63 kg
  • Footprint: 3.13″x1.95-2.72 wide/ 79.5 mm long x 49.5-69mm wide
  • Vertical Adjustment Range: +1.45″ to -2.87″/ +37 mm to -73 mm
We found other products you might like!