VIEW
658040
Dadoes (cross-grain cuts) and grooves (cuts with the grain) are cut efficiently on the table saw with a dado stack set. Unlike a wobbler, a stack set produces a flat-bottom cut with chip-free edges. Amana Tool® makes a dado stack set that is perfect for Veneered Plywood, Hardwoods and Melamine/Laminate. The standard width capacity ranges from 1/4" to 13/16". The set consists of two outside saw blades and four inside chippers. The outside blades feature hollow-ground plates for proper clearance, and alternate top bevel (ATB) grind with every sixth tooth flat ground (FT). 8” diameter, 46-tooth Outside blade, 5/8” bore, ATB/FT Tooth Grind, -5degree hook angle. Includes 5 2-Wing Chippers.
Country of Manufacture | Israel |
---|
WARNING: Wood Dust created by Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.
https://www.p65warnings.ca.gov/fact-sheets/wood-dust