Amana Tool 6-Piece Carbide-Tipped Countersink Set with Systainer
Used to countersink holes for the heads of screws in woods, plastic and non-ferrous materials. The 2-flute integral design ensures uniform and concentric results each and every time. Carbide tips provide chip free hole edges and lasts much longer than steel countersinks. Stored in a Tanos Systainer Plastic Case with a foam insert to keep bits secure.
3/8" Countersink • 1/4" Quick Release Hex Shank
WARNING: When drilling aluminum/non-ferrous materials, for optimal results and extended tool life use lubricant or air cooling. Make sure the material is fixed and drill is stable during drilling.
Set Includes:
- Carbide Tipped 82 Degree Countersink with Adjustable Depth Stop and No-Thrust Ball Bearing, 3/8 Dia x 1/8 Drill Dia x 1/4 Inch Quick Release Hex Shank
- Replacement Carbide Tipped Countersink with Slow Spiral HSS M2 Drill for #8 Size Screw 5/32 Drill Dia x 1/4 Hex Shank for #55229 Adjustable No-Thrust Countersink
- High Speed Steel (HSS) M2 DIN 338 Fully Ground Taper Point 3/32 Dia. x 1-1/8 x 2-1/4 Long Drill
- High Speed Steel (HSS) M2 DIN 338 Fully Ground Taper Point 1/8 Dia. x 1-1/2 x 2-3/4 Long Drill
- High Speed Steel (HSS) M2 DIN 338 Fully Ground Taper Point 5/32 Dia. x 1-3/4 x 3-1/8 Long Drill
- Tanos Systainer
Excellent for Drilling:
Natural Woods
Man-Made Boards
MDF
Chipboard
Plywood
Aluminum/Non-Ferrous
Aluminum Composite Material (ACM)
Composites
Composite Decking Materials
Acrylic
| Country of Manufacture | Israel |
|---|