Solid Carbide Compression Router Bits, 2-Flute, 1/2" Shank
Up-Cut bits evacuate the shavings from grooves efficiently, but can chip the top edge of the cut in plywood and other man-made materials. Down-Cut bits leave a beautiful edge on the top surface, but can blow out the bottom on through cuts (again…in plywood). The latest addition to the Ultra-Shear line-up of solid carbide router bits combines the best of both. The first 3/8" on the new Compression bits is Up-Cut. The remaining cutting length is Down-Cut. Plunge just past the Up-Cut section and now you're cutting with Down-Cut grind at the surface and Up-Cut evacuating the chips from the deeper part of your groove. It's the best choice for machining plywood, MDF, melamine veneer and particle board.
American Made Quality… Factory Direct Pricing
Woodpeckers makes Ultra-Shear 1/2" Compression Bits in two cut lengths; 1-1/2" and 2". Use the one closest to the thickness of your material. Don’t settle for inferior quality imported bits to save money. Woodpeckers uses state-of-the-art CNC grinding equipment, the highest quality solid carbide blanks and ultra-fine grinding wheels to produce American-made router bits at extremely competitive prices. The days of paying extra for middle-man markups are over. Buy direct from the manufacturer and pocket the savings.
Like all Woodpeckers products, Ultra-Shear Solid Carbide bits are made right here in our Strongsville, Ohio, facility just south of Cleveland. We’re confident you won’t find an American-made bit of the same design for less.
Country of Manufacture | United States |
---|---|
Flute | 2 Flute |
Shank | 1/2" |
WARNING: Wood Dust created by Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.