Sjobergs Elite 2000 Workbench
The Elite 2000 starts with a European Beech top 3-5/16" thick throughout and reinforced to 4-5/16" around the perimeter. The benchtop measures a generous 23-5/8" wide and just under 6 feet long….think aircraft carrier. The tail vise is the full width of the bench with two dogs, not the more traditional one. The bench top has dog holes the, length, as you would expect, but what’s different is that the front vise also has dog holes and mating holes across the top. Speaking of the front vise, it’s a massive 29" wide and can be mounted on either side of the bench so you can adapt it to any workspace, the bench includes four 1” heavy-duty, spring-tensioned steel dogs.
Sjöbergs has also developed a clever optional holdfast with a non-marring nylon pad. Drop it in any dog hole on the bench, and you can lock anything down to the bench in seconds. The legs are drilled with dog holes, too, allowing you to use the holdfast to get a grip on oversized projects like doors.
Six feet, not enough? Take it out to over seven and a half feet by adding the Elite Clamping Platform. This bolt on accessory for the Elite 2000 continues the dog hole pattern down the length of the bench and makes a great spot to do tight hand work. It has dog holes in every possible direction and the cantilevered design gives you a place where you can sit down and work comfortably. Add another one or two optional holdfasts and you will always be able to find a way to secure your work with both hands-frees.
The Elite 2000 is offered in several configurations:
- The Elite 2000 Workbench only
- The Elite 2000 Workbench with SMO4 Cabinet
- The Elite 2000 Workbench with SMO4 Cabinet and Elite Clamping Platform
- Additional Information
Country of Manufacture Sweden UPC No Manual No