Woodpeckers Tools

A Design Element & Joinery System All-In-One.

For as long as cross dowels have been around , people have been trying to hide them—not always with great success. Here are some you won't want to hide, in fact, you'll want them right out front in your designs. Woodpeckers is now making bright-finished stainless steel cross dowels. Drill a through hole in your project and on the face side you'll have a slightly domed polished button. Tone down the shine a little and create a “brushed stainless” look with a quick rub with a non-woven abrasive like Scotch-Brite.

Learn More

HANDY ORGANIZERS THAT SAVE SPACE AND ARE EASY TO INSTALL! PUT YOUR WASTED SHOP SPACE TO WORK!

Many woodworkers know that shop space is a lot like clamps; you can never have enough! While you can buy more clamps, expanding your shop is usually out of the question.

Learn More

We make three square insert tools. The Full and Mid-Size use the same inserts and the Pen Size uses smaller inserts. If you’re turning bowls and furniture components, the Full-Size is your best choice. The Mid-Size is a great choice if you turn pizza cutters, duck calls, shaving brushes and other palm-sized projects. The Pen Size tools are the right choice for pens, lace bobbins, finials and other fine, delicate work. Learn More

Creating beautiful turned pens starts with carefully preparing the turning blank. Every pen kit on the market includes a brass insert tube that has to be glued into the blank. Then the blank needs to be trimmed perpendicular to and perfectly flush with both ends of the insert tube. The trimming process is fundamentally important to great results, but until now, the tools available to pen turners for that job have left a lot to be desired. Now Woodpeckers is introducing the Ultra-Shear Pen Mill Ci, a pen mill that effortlessly cuts every material pen turners use…and through mountains of pen blanks.

Learn More

One hard and fast rule we’ve learned from our customers is that no matter how much room you have for your shop, it’s not enough. If you’ve been dreaming of having a Woodpeckers Router Table, but just can’t figure out where you would put it, we’ve got the answer for you. Replace the wasted real estate taken up by your table saw’s extension table with our new double-duty Extension Wing Router Table.

Learn More

T-Tracks are one of the most useful components available for building many different shop aids. They're very adaptable to any jig where solid clamping and straight tracking are needed. Learn More

Woodpecker's version of 1/4" T-Track has a number of nice features including a unique outside profile and compatibility with standard 1/4" hardware. Learn More

Standard T-track nuts won't fit in table saw slots. Our new Miter Slot Nuts will. Turned from steel, zinc plated and sized to fit most standard 3/4 x 3/8 miter channels in both table saws and router tables. The center is drilled and tapped with 1/4 -20 threads and counter bored to fit the head of standard hex bolts. In fact it has room for standard diameter sockets as well. Includes four complete sets of Miter Slot Nuts and hardware. Made in the U.S.A.

Learn More

If you're doing free hand routing, you know how tricky it can be to start the cut. Router bits tend to spin the board and gouge the wrong edge when you start the cut. This often results in damage to your carefully shaped furniture parts. Starting Pins can help you gain control but don't offer dust collection or protection from flying chips. The new Woodpecker Free-Hand Guard does all these things in a well built, high quality form. Learn More