LEIGH D4R DOVETAIL JIG
Simply position the guide fingers to the pattern you want, and guide your router around the fingers to rout the joint you choose. No need to dimension the lumber to fit your jig! The D4R can handle joinery up to 24” in length and on boards up to 1-1/4” thick! Create flawless Dovetails and Box Joints with endless variations! No other Jig on the market can offer you so much joinery capability!
Adjusting the fit of your joints couldn't be any easier. When cutting half blind dovetails, you will lower or raise the bit to create a tighter or looser fit. When cutting box joints/finger joints, the included Leigh Elliptical guide bushing is turned clockwise or counterclockwise for a tighter or looser fit.
The D4R is both strong and portable. A true 1 piece CNC Machined aluminum jig body is the heart of the system. Cast metal end housings are used to secure the jig to mounting board or workbench. Boards are held securely with the built in cam action clamps against a non-marring textured clamping surface. Both rear and front stops are machined into the jig. Plus the rear stops are undercut for rabbeted half blind drawer fronts. All of this comes with a 5 year manufacturer's warranty!
If you are looking to get the very most out of your Leigh D4R Pro, consider adding the AC-D24 Kit. The foundation of this kit is the Vacuum and Router Support. Unparalleled dust control is achieved by attaching the VRS to your jig. The vacuum chute is trapped under the router, right where the cutting is happening and travels effortless along the jig as you move your router. This can easily adapt to most small vacuums as well as large built in vacuums on the market with the standard adaptors to fit hoses from 1” - 2-1/2”. Along with this AC-D24 Kit comes the Premium Leigh 13 piece Router Bit Set. 11 Dovetail bits, 5/8 Guide Bushing and a 1/2"-8mm collet reducer are all included in the wooden storage case. Each of these carbide tipped router bits are Swedish made and honed with a 600 grit diamond wheel to yield smooth and efficient routing.
CREATE ALL OF THESE JOINTS AND MORE!
Variably Spaced Through Dovetails
Variably Spaced Half-Blind Dovetails
Single Pass (fixed spaced) Half-Blind Dovetails
Rabbeted Half-Blind Dovetails
Finger (Box) Joints, 3/8" and 3/4"
Asymmetrical Joints (Through and Half-Blind)
Simple Angle Joints
Obtuse Angle Joints
Acute Angled Joints
Compound Angled Joints
Shelf Holes and Notches
Included with Every Leigh D4R Pro:
Jig Base, Support Brackets and Knobs
Jig Mounting Hardware,Inc. Leigh Wrench/Gauge
Guide Finger Assembly, Square Drive Screwdriver
Scale assemblies, 5/64" Hex Key
Cam-Action Speed Clamps and clamping bars
Template Guide Bushing (e7-Bush), inc. pin wrench
Router Bits: 1/2", 8° and 14° Dovetail Bits, 5/16" Straight Bit
Collet Reducer for router, 1/2" to 8mm
Bridge Piece Material (for Half-Blind Dovetails)
Nylon Stop Rod (for Single Pass Half-Blind Dovetails)
Sliding Dovetail Fence (for Sliding Dovetails)
Spacer (for Box joints / Finger joints)
Spacer (for Single Pass Dovetails)
Fully Illustrated User Guide (English only)
Included with the Leigh 13 Piece Router Bit Set:
8mm and 1/2" shank router bits: Through dovetail 1/4", 5/16", 3/8", 7/16", 11/16", 13/16", 7/16", 1/2". Half-Blind Dovetail Bits , 10°, 12°, 18°. Also includes a 1/2" to 8mm collet reducer for 8mm shank bits -8), a 5/8" guide bushing for 1/2" shank bits and a bit storage box.
Included with the Leigh Vacuum Router Support (VRS) :
Router Support Beam
Hose adaptor small
Hose adaptor large
Finger assembly support brackets where required
Screws & washers
- Additional Information
Country of Manufacture Canada UPC No Manual No