Semble Stock Your Shop 24-Clamp Set
If you’re looking to update your arsenal of clamps or you’d just like to reinforce the troops, the Semble Stock Your Shop 24-Clamp Set is full of a variety of sizes and styles of Semble Woodworking Clamps—some of the highest performing clamps available. Included in the entire set are 8 heavy-duty parallel jaw clamps, 6 medium-duty parallel clamps, 8 medium-duty F-style clamps, and 2 track clamps.
When you’re ready for better, reach for Semble Woodworking Clamps.
Semble HD Parallel Jaw Clamps
Parallel jaw clamps distribute clamping pressure evenly over the entire jaw, keeping your project square as the glue sets. Now, SEMBLE takes the parallel jaw design even further with user-friendly adjustment, a reversible head and extra features that don’t cost extra.
The sliding jaw of the SEMBLE Parallel Jaw Clamp won’t free fall when used (or carried) vertically. Push the handle slightly toward the rail to move it toward the fixed jaw. Pull it slightly away from the rail to slide it away from the fixed jaw. In the center, it stays just where you put it. The wide footprint of both fixed and sliding jaws provide a stable base for the clamps on your bench.
Instead of dimpling the end of the rail and making the sliding jaw a permanent fixture, SEMBLE uses a removable stop. Now you can remove the sliding jaw, reverse it, and use the clamp as a spreader. These clamps can exert over 1,500 lbs. of force, either in or out. The pads are 1-7/8” wide by 5-3/4” long with a generous 3-3/4" throat depth. The 1-1/8" x 3/8" rail is zinc-coated. That means glue squeeze-out pops right off after it dries and the bar resists corrosion, even in basement shops.
The 4-inch-long dual-durometer contoured handle has a raised contour that gives a powerful non-slip grip. When you need just that extra little bit of pressure, pivot the handle 90° giving you the leverage to get the job done. Replaceable pressure caps protect delicate surfaces, repel glue and resist paint and solvents. Two snap-on plastic standoffs keep your work 1/8″ above the rail to avoid stains from the interaction between steel, wood and glue.
Semble MD Parallel Jaw Clamps
Do you build furniture and smaller, delicate casework? If so, this is bound to become one of your favorite clamps. The Semble Medium Duty Parallel Jaw Clamp delivers 440 pounds of clamping pressure, distributed uniformly over the jaws. That evenly applied power is delivered by a clamp that is light, nimble and easy to position.
The sliding jaw of the SEMBLE MD Parallel Jaw Clamp won’t free fall when used (or carried) vertically. Push the handle slightly toward the rail to move it toward the fixed jaw. Pull it slightly away from the rail to slide it away from the fixed jaw. In the center, it stays just where you put it. The wide footprint of both fixed and sliding jaws provide a stable base for the clamps on your bench. The 3-inch-long dual-durometer contoured handle ensures a powerful non-slip grip.
Instead of dimpling the end of the rail and making the sliding jaw a permanent fixture, SEMBLE uses a removable stop. Now you can remove the sliding jaw, reverse it, and use the clamp as a spreader. The stop does double-duty, also supporting the bar on your bench when working on your assembly. The jaws are 1-1/8” wide by 4-3/8” long with 3-1/8" throat depth. The 3/4" x 13/64" rail is zinc-coated. That means glue squeeze-out pops right off after it dries and the bar resists corrosion, even in basement shops.
Semble MD F-Style Clamps
“F” clamps deliver faster clamping and more versatility than “C” clamps. With a head that slides along a rail, rough positioning takes just seconds and you’re only twisting the handle to apply pressure. The rail also gives you a much wider clamping range. Semble “F” Clamps feature a cold-drawn rail that has been carefully finished to work smoothly and resist corrosion. The dual-durometer handle ensures a secure comfortable grip. The fixed-jaw protective cover has vee-grooves to improve clamping on round and curved stock. The MD Clamps have 3-1/8" clamping depth and deliver 600 pounds of clamping pressure.
Semble Track Clamps
Perforated bench tops and track saws have revolutionized the way many of us approach woodworking. Here’s a clamp built for both jobs. This specialized “F” clamp fits in the 12mm x 8mm t-slot of most track saw rails (Festool, Makita, Triton and some others). It’s perfect to secure the rail while you cut your sheet goods. The arm is also just the right length to thread through a 20mm (or 3/4") hole in a bench top to hold your work down to the table. The dual-durometer handle ensures a secure comfortable grip. Clamps a full 8" on top of your bench.
| Country of Manufacture | Taiwan, Province of China |
|---|
WARNING: Wood Dust created by Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.
