Normally best results are obtained by selecting one stiffener 1/2 to 2/3 the sawblade diameter and mounting it against the outside of the sawblade; (a 10" blade uses a 5" stiffener).
Be sure any bumps, scratches or burrs on the saw blade are stoned flat for dust-free, metal-to-metal contact between the stiffener and saw blade.
Mount with normal arbor nut and washer. Not for Chop Saws.
- Additional Information
Country of Manufacture United States UPC No Manual No
- Prop 65 Warning
Prop 65 Warning
You may also be interested in the following product(s)