Sawing

Grid List

Set Descending Direction

1-10 of 33

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. GRR-RIPPER Advanced
    The GRR-RIPPER is a push block on steroids. It significantly increases the amount of surface area gripping your work piece. A typical push block rests on the piece between the saw blade and fence. The GRR-RIPPER is actually two blocks in one. It's split to straddle the blade and grab both pieces simultaneously. So now it's easier to rip thin strips (1/4” or larger) and also support the original piece. Learn More
  2. Parallel Guide System

    Repeatable Rip Cuts from Your Track Saw


    Everyone who has wrangled a full sheet of plywood around a table saw immediately recognizes the advantages of track saws for breaking down sheet goods. Keeping the unwieldy sheet stationary and moving the saw down a precision-made rail makes a lot of sense, but how do you get two (or more) pieces to come out exactly the same width?  Just like the rip fence on a table saw, Woodpeckers new Parallel Guide System takes measuring and marking out of the equation and uses a physical reference to ensure your last cut is exactly the same as your first. The Parallel Guide System locks onto your Festool, Makita, Kreg or Triton guide rail and instantly aligns the cutting line parallel to, and a specific distance from, the edge of your stock. Learn More

  3. Extension Wing Router Table

    One hard and fast rule we’ve learned from our customers is that no matter how much room you have for your shop, it’s not enough. If you’ve been dreaming of having a Woodpeckers Router Table, but just can’t figure out where you would put it, we’ve got the answer for you. Replace the wasted real estate taken up by your table saw’s extension table with our new double-duty Extension Wing Router Table.

    Learn More
  4. Downdraft Dust Cabinet

    Enhance your work environment and add years to your router’s life with Woodpeckers new Downdraft Dust Cabinet. Porting the dust out the back of the fence gets a good portion of the chips off most routing operations, but the dust that does go down works its way into the motor windings and spindle bearings of your router. The Downdraft Dust Cabinet completely encloses your router and has a 4" port out the rear. It captures almost everything not caught up top and keeps your router clean and cool. The Downdraft Dust Cabinet is sized and shaped to fit even the largest routers on the market. Mounting it to a Woodpeckers Router Table requires no drilling, and mounting it to any other router table requires just a few simple screw holes Learn More

  5. woodworking adjustable track square

    The modern track saw has taken the market by storm. It puts industrial table saw accuracy in the field for remodelers and trim carpenters, and for the garage and basement woodworker, it cuts the shop space required to handle sheet goods in half (compared to a table saw). The concept is simple…put the guide rail on your workpiece, drop the track saw on the guide rail, and a straight cut is guaranteed. But, “straight” isn’t enough. Cuts typically need to be parallel to an existing edge, perpendicular to an existing edge, or at a specific angle. We took care of “parallel” last year when we released the Parallel Guide System. Now we have “perpendicular” (and nearly every other angle) under control with the Adjustable Track Square. The Adjustable Track Square mounts to your Festool, Makita, or Triton guide rail in seconds. Once it’s mounted you have locked-in accuracy for square cuts and cuts at any angle up to 60°.

    Learn More
  6. Woodpeckers Saw Gauge 2.0
    Adjusting the alignment between the blade and the miter slot of your table saw is the single most important thing you can do to improve your woodworking. The next item on that list is adjusting your rip fence to be parallel to the miter slot. With the miter slot, rip fence and blade all parallel to each other, your table saw is ready to deliver accurate cuts. Woodpeckers new Saw Gauge 2.0 makes those adjustments easier and more accurately than any other tool on the market. What sets Woodpeckers Saw Gauge 2.0 apart from the rest is our method of registering the gauge in the miter slot. Learn More
  7. Bora NGX Clamp Edge System

    The BORA NGX Clamp Edge saw guide makes it easy to achieve straight and precise cuts with your circular saw. Cutting large sheets of plywood or MDF materials has never been easier. Just adjust the clamp to the desired cut dimension and lock it in place. During the cut, your circular saw rides along the edge of the BORA NGX saw guide resulting in a professional, accurate cut. And, best of all with the BORA NGX Clamp Edge, you position, adjust and lock the clamp all from the same end. This convenience feature eliminates the need to walk around to the opposite side of the material to adjust or lock the clamping mechanism.  Scroll down for more info.

    Learn More
  8. Japanese Dozuki Saw for Hardwoods
    Dozuki Saws with replaceable blades feature the precision and durability of tensioned high carbon steel blades which are easily removed from their bamboo-wrapped handles for replacement when worn. The Dozuki "ZET" Saw is one of the smoothest cutting saws you’ll ever use, ideal for tight fitting, precision joinery. It is specially designed for hardwoods such as Ebony, Walnut and Oak. The teeth are impulse hardened for superb cutting performance. Ideal for cutting dovetails, tenons and other joinery. Cuts equally well as a rip or crosscut saw. The 21 TPI x .012" thick blade of this saw can be quickly changed by a simple tap on the back. Rigid back insures accurate cuts. The 240mm blade version is 535mm (21") long and the 150mm version is 374mm (14-3/4”) long. Buy either and they come with an additional blade. Learn More
  9. Woodpeckers Saw Gauge

    Woodworkers spend hundreds or even thousands of dollars on a table saw then spend hundreds more on high quality saw blades and still get burn marks when doing rip cuts. Even getting accurate results with a miter gauge can be difficult when the blade alignment is off. In most cases this is the result of misalignment between the miter slot, fence and blade. Learn More

  10. Woodpeckers BladeSaver

    Carbide tipped circular saw blades are a substantial investment and, like all investments, deserve protection. You always take care to avoid cutting through a nail or screw. But these blades are easily damaged when off the saw due to careless storage. Those carbide teeth are tough on wood, but are brittle and chip easily if struck by other metal – like other saw blades.

    Learn More

Grid List

Set Descending Direction

1-10 of 33

Page:
  1. 1
  2. 2
  3. 3
  4. 4

SAWING TOOLS AND ACCESSORIES FOR WOODWORKING

We don’t make saws, but we do make gear and sawing tools to make your saws perform better. Tune up your table saw with our Blade Gauge. Get repeatable rip cuts from your track saw with our Parallel Guide System. Get square cross cuts from your track saw with our Adjustable Track Square. We offer top-quality table saw accessories from other companies, too. Look to Woodpeckers for saw blades and dado sets from Forrest and Amana, band saw blades from Starrett, table saw fences and miter gauges from Incra, and saw safety equipment from Micro Jig. Are you in to hand saws instead of power saws? We sell a wide variety of Dozuki, Kataba and other Japanese saws.