Routing

Grid List

Set Descending Direction

1-10 of 20

Page:
  1. 1
  2. 2
  1. HOLE-BORING JIG


    Woodworkers around the world have embraced the idea of a work surface milled with a gridwork of holes. Dozens of companies (large and small) produce devices that fit into the grid to hold your work. The milled work surface itself is available from several companies, often as part of a workbench or work table. Now, with Woodpeckers Hole Boring Jig, you can make your own gridwork top, right in your shop, for a fraction of the cost of a ready-made top. Whether you’re building a custom work table or replacing the top on something like a Festool MFT, you can mill the top with near-CNC accuracy with nothing fancier than a good router and a sharp bit.

    Learn More
  2. Downdraft Dust Cabinet
    Enhance your work environment and add years to your router’s life with Woodpeckers new Downdraft Dust Cabinet. Porting the dust out the back of the fence gets a good portion of the chips off most routing operations, but the dust that does go down works its way into the motor windings and spindle bearings of your router. The Downdraft Dust Cabinet completely encloses your router and has a 4" port out the rear. It captures almost everything not caught up top and keeps your router clean and cool. The Downdraft Dust Cabinet is sized and shaped to fit even the largest routers on the market. Mounting it to a Woodpeckers Router Table requires no drilling, and mounting it to any other router table requires just a few simple screw holes. Learn More
  3. Cast Aluminum Router Mounting Plate
    If you're looking for the highest quality router plate money can buy, you found it.

    The Woodpecker Cast Aluminum Router Plate is stronger, stiffer and less prone to warp or flex then other aluminum, polycarbonate or acrylic router plates. In addition, its durable, low friction anodized coating makes it easier and smoother for wood to glide across. Although this fixture grade material is more expensive, its numerous advantages make it well worth the few extra dollars for what typically is a one time purchase.

    Learn More
  4. Router Table Tops - MDF

    Woodpeckers laminated MDF Router Tables are available in two sizes 24 x 32 (23-1/2 x 31-1/2) and 27 x 43 (26.95 x 43). Each table is 1-3/8” thick.

    ADD A ROUTER LIFT OR PLATE AND RECIEVE A $10 DISCOUNT AT CHECKOUT.

    Learn More
  5. Micro Adjust
    Woodpeckers new Micro Adjust accessory for the Super Fence and RF3 Router Fence is just the answer for applications requiring micro-fine adjustments relative to the router bit. Learn More
  6. Whiteside 7-Pc Basic Router Bit Set
    The Whiteside Basic Router Bit Set includes some of the most called upon bits for woodworking operations with your router. This set includes the 3/8” radius roundover and beading bit, 45 degree chamfer bit, 1/2” radius flush trim bit, 3/8” cutting depth rabbet bit, 3/8” radius cove bit, 1/2" diameter straight bit, and the 1/4" diameter straight bit. These bits are the staples of most every woodworker's shop. The Whiteside Basic Router Bit Set even includes this durable molded case for safe storage and organization. All bits are 1/2" shank. Learn More
  7. Leigh RTJ400 Router Table Jig
    If you own a router table, and have been looking for a top notch dovetail and box joint jig, this could be just what you need! The Leigh RTJ400 takes a completely different approach to cutting fine joinery by eliminating the need to hold and maneuver your router through the fingers of a traditional jig. Not only that, but this jig does not require a dedicated router table, is easy to store and better yet, easy to use! Learn More
  8. AXIOM VECTRIC PHOTO VCARVE (price includes $9 shipping charge)
    PhotoVCarve has been developed to allow CNC machines to carve and engrave in a way that until now could only be done using an expensive laser marking systems. Learn More
  9. Whiteside Ultimate Trim Router Bits

    When it comes to template work or flush trimming matching wood surfaces, these bits are the best of the best! Made of solid carbide, the Whiteside Ultimate Trim Bits offer a unique compression spiral design that allows the cut to occur on both faces of the material at the same time. This results in the cleanest cut possible by virtually eliminating any chance of tearout on the top or bottom face. This type of compression cut technology has previously only been seen in industrial grade cutters engineered for CNC machines but is now available for home shops! Take your pick from the Flush Trim, Pattern/Plunge, or the Combination styles! All of these bits are made from Solid Carbide, offer high end ball bearing guides.

    Learn More
  10. INCRA I-BOX

    The Incra I-Box is the very best when it comes to producing a wide variety of beautiful box joints and finger joints. Not only can the I-Box be used on either side of the table saw blade, and the router table but it also offers a much faster setup, safer operation and more versatility compared to traditional jigs. The I-Box is very easy to use and even comes with a detailed DVD covering everything from the basic setup to very complex joints.

    Shipping time 10 to 12 weeks.

    Learn More

Grid List

Set Descending Direction

1-10 of 20

Page:
  1. 1
  2. 2

ROUTING TOOLS AND ACCESSORIES FOR WOODWORKING