Routing

Grid List

Set Descending Direction

1-10 of 81

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Woodpeckers Board Mill


    The Wall Street Journal recently spotlighted the growing trend in using reclaimed lumber in high-end homes. Live-edge slabs are starting to show up in shelving as well as tables. Hardwood lumber can be up to 40% less expensive when purchased rough-sawn instead of planed. What do these three things have in common? They all point to the need for a way to flatten wide boards. If you don’t have the space or the budget for a $10,000, one-ton jointer in your shop (and, frankly, who does?), but you still want flat boards up to 16" wide, Woodpeckers new Board Mill is for you. Delivery is scheduled for January 2020.

    Learn More
  2. Free Hand Guard
    If you're doing free hand routing, you know how tricky it can be to start the cut. Router bits tend to spin the board and gouge the wrong edge when you start the cut. This often results in damage to your carefully shaped furniture parts. Starting Pins can help you gain control but don't offer dust collection or protection from flying chips. The new Woodpecker Free-Hand Guard does all these things in a well built, high quality form. Learn More
  3. PRL V2 (Precision Router Lift)

    The Precision Router Lift V2 (PRL-V2) combines the best in router lift technology. The PRL-V2 is manufactured entirely in the U.S.A by Woodpeckers.

    Learn More
  4. Woodpeckers PushGuard
    The Woodpeckers PushGuard is a push block, hand guard and chip deflector all rolled into one! Not only will you gain improved control over your stock with the grippy rubber pad, but you will also have the added safety benefit of the guard between your hand and the cutter as well as the chip deflector to help block flying debris! Learn More
  5. Variable Router Jig

    Slides and Locks to Make Any Template You Need

    Router guide bushings change your hand-held router from an uncontrollable project destroyer into a precision milling machine. But, creating the jig you need to use guide bushings is an enormous chore that wastes time and material and hardly ever yields something that can be used again after the current project is complete. Woodpeckers new Variable Router Jig lets you create a perfectly square template any size from a couple inches up to 13" x 13" or 13" x 27". When you’re done with that project, it instantly reconfigures to the next template you need. When you don’t need it, it breaks down and stores away in a small space, waiting for your next project…no more wall full of purpose-built templates gathering dust while you try to remember what they’re for.

    Learn More
  6. Woodpeckers Slab Flattening Mill



    The hottest trend in interior design these days is live edge slab table tops. And, why not? The natural curves of the trunk give an organic feel. The crazy grain patterns in crotches and burls are eye-catching.  Even cracks that would have sent lumber to the burn pile just a few years ago are being controlled and enhanced with butterfly patches and epoxy inlays. However, slabs present some challenges in the shop. Overall width and weird grain changes make the use of a jointer and thickness planer impractical if not impossible. Woodpeckers new Slab Flattening Mill makes it simple to use your router to flatten and thickness slabs right in your own shop faster and easier than you ever thought possible.

    Learn More
  7. Woodpeckers Super Fence
    Now you can have a router fence that's not only a high quality American made tool but also designed to help woodworkers with all woodworking operations from roundovers, raised panel doors and precision edge jointing. Learn More
  8. 8-PC Twist Lock Ring Set, Molded
    For ideal stock support, it's recommended that the router bit opening be approximately 1/8" to -1/4" larger than the bit diameter. This clearance is enough to allow for air flow as well as stock support while routing. This set of eight is in addition to the standard three rings supplied with each Woodpeckers Router Mounting Plate and Router Lift. They come in a handy MDF stand with a total of ten slots. The two additional slots hold the two standard rings that you're not using. Learn More
  9. Combo Shelf Pin Template
    Needing to make a series of holes for shelf pins? Now you have a heavy duty alternative that won't break the bank. Woodpeckers new Shelf Pin Template covers all the bases. It combines both inch and metric spaced holes, ¼” or 5 MM, and works with self-centering drills bits, router guide bushings and even plain drill bits (with optional drill guide.) This is a very unique tool that combines what are typically multiple templates into one, accurately machined tool. Learn More
  10. Super Track Flip Stop
    Woodpeckers Super Track Flip Stop is the perfect choice for a stop block when using the Woodpeckers Superfence or Woodpeckers Super Track! Having the ability to accurately stop a cut just where you want and then flip the stop out of the way is almost a necessity in the shop. Being able to bring this function to your router table and also your chop saw is a great way to speed up your production and greatly improve your accuracy. Learn More

Grid List

Set Descending Direction

1-10 of 81

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

ROUTING TOOLS AND ACCESSORIES FOR WOODWORKING

Whether you want to build your own router table around our top-quality router plates and router lifts, or want to buy a fully-loaded router table package, we have you covered. Our router table components include the Super Fence, Micro Adjust, router table dust collection system, adjustable router table stands, featherboards and casters. For cabinet door cope and stick construction, our Coping Sled makes rail and stile joints with ease and accuracy. Beyond the router tools we make right here in Strongsville, we offer router bits from Whiteside and Amana, Leigh dovetail jigs, Porter-Cable routers, and Incra router accessories.