M-Power FastTrack Precision Sharpening System (PSS1)

M-Power FastTrack Precision Sharpening System (PSS1)
ITEM #:MP-PSS-GROUP
With Diamond Cross Technology. Traditional sharpening systems require that a steady hand move the tool across a stationary stone. More often than not, this results in a convex bevel which makes it very difficult to achieve a razor sharp edge. With the FASTTRACK your cutting tool is stationary and the stone is moved back and forth across the bevel.
M-Power FastTrack Precision Sharpening System (PSS1)

1000 Grit Diamond Cross Stone - Super Fine Finishing

SKU: MP-DC-1000

Regular Price: $12.99

Special Price $8.99

M-Power FastTrack Precision Sharpening System (PSS1)

220 Grit Diamond Cross Stone- Preparation

SKU: MP-DC-220

Regular Price: $12.99

Special Price $8.99

M-Power FastTrack Precision Sharpening System (PSS1)

450 Grit Diamond Cross Stone- Finishing

SKU: MP-DC-450

Regular Price: $12.99

Special Price $8.99

M-Power FastTrack Precision Sharpening System (PSS1)

1000 Grit De-Burring Plate

SKU: MP-DBP

Regular Price: $9.99

Special Price $7.99

M-Power FastTrack Precision Sharpening System (PSS1)

MPower Fasttrack Mini Strop

SKU: MP-10095

Regular Price: $9.99

Special Price $7.99

M-Power FastTrack Precision Sharpening System (PSS1)

MPower Fasttrack Grip Mat 7-1/2” x 5-1/2”

SKU: MP-10103

$1.99
Description

Details

M.POWER has developed the brand new “Diamond Cross” stones specifically for the FASTTRACK Sharpening System (formerly known as the PSS1) to bring you an innovative and powerful combination sharpening system that will have you regaining that razor sharp edge in seconds. Chisel in.. and sharpen. Plane blade in... and sharpen. No set up time.. No complicated attachments and No experience needed.. It's that simple. From the total beginner to the most discerning of professionals. The FASTTRACK Sharpening System paired with the new Diamond Cross stones will deliver a flat ground edge every time. This is one of those tools that when you see it you'll say “now that's a good idea”. The FASTTRACK Sharpening System is made up of two main parts, the base and the stone holding carriage. The base sits stationary on your bench as does the tool you want to sharpen. Only the carriage slides back and forth on nylon rails to create a perfectly flat bevel and razor sharp edge. The carriage will create two different angle bevels, 25 and 30 degrees. Two stones are included with the system, a 220 grit preparation stone and a 450 grit finishing stone. Additional stones are available, Extra Coarse, Fine Finishing, and Super Fine Finishing...

New Accessories:

When sharpening on the FASTTRACK the burr removal was carried out by hand; wiping the flat of the blade on one of the FASTTRACK diamond stones. However this can now be achieved much more quickly by fitting the FASTTRACK accessory “De-Burring plate”. After sharpening simply sliding the blade back away from the carriage and across the De-Burring plate and the wire/burr is wiped clean from the blade. The Oil resistant 3M self- adhesive backing ensures that when it's fitted it's down for good. Fitting the De-Burring plate has an added bonus; due to the naturally abrasive surface of the diamond plate. Holding any chisel or plane blade during the sharpening process becomes easier as the diamond plated surface tends to grip and hold the blade in position better.

Take your Fasttrack Precision Sharpening System to a new level with the 2.5° Angled 3” Diamond Stones.  Although the Fasttrack’s two sharpening angles 25° and 30° covered most needs, there were requests for other options.  Introducing a NEW range of 2.5° Angled Diamond Stones. These work with the chisel sharpener and the knife sharpener.

The bedrock of regular FASTTRACK Chisel Sharpener users are “on site” professionals. Their needs are common to a lot of woodworkers. Maintaining a good blade edge at critical points in a job and quickly. The much loved FASTTRACK now has another way to help make that job easier. The FTS Mini Strop is an “on board” real leather finishing strop to put that final touch to any chisel or plan blade. Fitted to the underside of the FASTTRACK Base. Flip the unit it over and its ready to go.

Keep your FASTRACK Chisel Sharpener from slipping on even the slickest surfaces.  This 7-1/2” x 5-1/2” mat will store away easily between sharpenings.

Additional Information

Additional Information

Country of Manufacture United Kingdom
UPC No
Manual No
Video

Video