Extension Wing Router Table Premium Package - 45" NC
Extension Wing Router Table Premium Package
Bundled with the Extension Wing Router Table are the following:
V-2 Precision Router Lift Adjusting the depth of cut or changing bits in a table mounted router no longer requires crawling under the table or muscling a router plate out of the table. Woodpeckers V-2 Precision Router Lift goes from lowest to highest setting in less than 2 seconds. In the V-2, almost every router on the market travels far enough up to enable bit changes with standard wrenches from the top of the table. Gross adjustments take just seconds with the lift wrench and fine adjustments can be feathered in with a thumbwheel that is just inches from the bit…right where you hand sits when you’re eyeballing the bit’s height.
Super Fence The base plate and vertical faces of Woodpeckers Super Fence are made from our exclusive Super Track. This versatile 7-track extrusion is carefully made to be very flat and very straight. The fixtures that attach the vertical fence surfaces to the base are machined in our facility to exacting tolerances and designed with accuracy as the primary mission. You’ll feel it as you assemble the components for the first time. Everything fits and feels just right, every step of the way, from the adjustable fence opening to the parallel travel of the offset feature, to the MDF sub-fences.
Micro Adjust Sneak your Super Fence right up to the perfect setting with the Micro Adjust. It mounts to the back of your Super Fence and locks in the same track. Just lock the Micro Adjust with the Super Fence clamps still loose and you can dial in your perfect fit.
Downdraft Dust Cabinet Keep your router cool, clean and running smooth while also eliminating the chips that escape the rear fence dust port. Four-inch dust port connects to standard flex hose or rigid duct. Built-in blast gate maintains dust collector efficiency when router table is not in use. Full-width door with magnetic catch provides easy access to your router.
We offer two sizes of the Extension Wing Router Table; 27" x 23" and 27" x 45". Either size will fit on either side of any 27" deep table saw. That would include all SawStop models except the Industrial, most PowerMatic 10" models, most Delta/Rockwell Contractors Saws and most Unisaws, most older Craftsman table saws and many, many more. Simply measure your table saw’s cast table from front to back. If it is 27" (and it probably is), the Extension Wing Router Table will fit. The package includes heavy-duty legs with adjustable feet to ensure your extension is stable and level with the main saw table. The 45" extension is available either with or without a combination miter channel and T-track. The choice gets down to how you’ll use your router table. The track model has the router placed closer to the edge, just like our free-standing router tables. The track-less model has the router plate more central, giving you more support when working large panels.
|Country of Manufacture||United States|