Wooden Router Table Stand

This Wooden Router Table Stand does what it needs to, with character. Constructed of Baltic birch plywood (2 grades available) and fastened with rock solid steel cross dowels and large head bronze plated connector bolts.

The Stand consists of two reversible sides, two upper braces, two lower braces and a shelf. Assembles in minutes.

You can use these stands as is, apply the finish of your choice for a cleaner appearance and even build shelves and drawers to store your router bits and suppies.

The Woodpecker 24 x 32 Router Table with its pre-bored holes connects directly to the Stand with the same steel cross dowels and bolts. A beautiful pair.

Although the following descriptions are not “official” lumber industry explanations, they should give you the general idea between the two grades we offer.

GRADE A STANDS: 18 MM (23/32) Birch plywood veneer with birch plywood laminations throughout. Minimal edge voids. Minor edge filling may be required if finishing.

GRADE B STANDS: 18 MM (23/32) Birch plywood veneer with poplar plywood laminations throughout. Some edge voids. Edge filling will likely be required if finishing.

Includes pre-fabricated wooden components, cross dowel and connector bolt assembly hardware, steel leveler brackets, screws and levelers.