Unilift Router Lift

The Unilift is the first four post router lift, the first lift available in 1/16 Fast or 1/32 Fine pitch and the first lift with an interchangeable router mounting plate. With pre-machined hole patterns for many different routers, now virtually every router type can be adjusted from above the table.

FOUR POST SUPPORT
While most parallel plate style lifts try to support routers from only one side and only two posts, the Woodpecker UNILIFT provides support on both sides of your router with four precision ground and polished steel posts.

CHOICE OF PITCH
The new UNILIFT is available in either a 1/16 Fast Pitch or 1/32 Fine Pitch version. This means you now have a choice of rapid height adjustment with 1/16” per revolution and .002” per graduation or 1/32” per revolution and .001” per graduation. No special tools required. Just pick the style you prefer, and that’s what we’ll build for you.

INTERCHANGEABLE ROUTERS
The unique router mounting plate design of the UNILIFT now makes it possible to easily interchange different routers. By attaching a separate mounting plate to each router, you can change routers in just a couple of minutes.3-3/4” RANGE
The new UNILIFT has 3-3/4” height adjustment range. This is about 1” more then what most plunge routers have.

SOLID BRAKE
The new UNILIFT also features a rock solid brake designed to firmly lock the router height position and prevent unwanted height changes. Brake Wrench included.

CHAIN DRIVE
Like the popular Precision Router Lift, the UNILIFT is a chain drive device offering durable, slip free transmission of the crank handle rotation.

SUPERIOR PLATE
The UNILIFT is built on a cast, blanchard ground 9.260" x 11.763" by 3/8” thick aluminum tool plate. The plate has two spring-loaded temperature compensating ball bearing plungers and eight threaded set screws for leveling. With these easily accessible leveling screws, you won’t have to wrestle underneath the table to level it. Plus, the ball bearing plungers ensure that your router is against the table edge before you begin cutting. They not only position the plate but also eliminate vibration and heat related deformity.

By machining a recess in the underside of the main plate, the effective thickness added to the normal base of your router is 5/16”. That’s at least 1/16” less then competitive plate type lifts.

TWIST LOCK RINGS
Included with each UNILIFT are three polycarbonate reinforced TwistLock rings with a 1” and 2-5/8” hole diameter as well as a step ring for PC template guide bushings.

WIDE COMPATABILITY
Each UNILIFT comes with the new Speed Crank, (3) machined TwistLOCK rings, a solid brass knurled Starting Pin, Spanner Wrench, Brake Wrench and mounting screws for the following routers:

QUALITY CRAFTSMANSHIP
Every part of the UNILIFT, from the precision steel lift screws, the polished steel posts and the meticulously machined rings are crafted to exacting levels of accuracy rarely found in woodworking equipment. Many tolerances of the UNILIFT are measured in .0001” increments.

This accurate, ruggedly built tool will serve you for years. We guarantee it, for life.

PATENTED DESIGN
The patent pending Woodpecker UNILIFT is manufactured by us, right here in our state-of-the-art metal working facility. We make it, we sell it, and we stand behind it. Because we sell direct, you don’t have to pay for multiple levels of distribution. For the price of your average router lift, you now can treat yourself to above average quality. Invest in the best. You won’t just like it, you’ll love it.

UNILIFT or PRL?
If your router will fit either the Woodpecker PRL or UNILIFT, pick the PRL.  Why?  Simple, the PRL enables above the table bit changes without the use of a bit extension.

Click to download instructions. (Instructions-596K)

Click to download Bolt Patterns (Instructions)