Incra Jig Table Saw Package #5
The combination of Incra's 52” TSLS Table Saw Fence, the WonderFence Joinery Package and the Woodpecker Extension Wing Router Tables make it possible for any level woodworker to achieve excellent results in building cabinetry and furniture.
Incra's patented lead screw technology delivers both accuracy and repeatability of better then .002”. This precision combined with the engraved stainless steel scale and detented micro-adjustability will forever change what you expect from your table saw.
This particular package includes the 52” TS LS Rip Fence System, the WonderFence Joinery Package the Woodpecker 28” x 32” Router Table, a 21” Solid Filler Table and a 28” x 21” Router Table. The rip fence system can attach to virtually any table saw with a square front and back edge. Enough hardware is included to cover the vast majority of table saws. The standard components work on saws measuring 28” front to back or less. Optional extended length parts are available for saws up to 38”.
This system can accurately position the fence up to 52” from the saw blade and can also be reversed for operation from the left. It is similar to the 32” version in that the positioner has 32” of travel, but because of the longer rails, can be accurately indexed between two different sets of stops to achieve distances up to 52” from the saw blade.
The WonderFence Joinery Package enables you to use the extension wing router table for creating incredibly tight fitting dovetails, box joints, rail & stile doors, mortise and tenons and much more. It's offsetable variable throat fence can also be used as a jointer and for creating molding.
This package includes a 28” x 32” right side Woodpecker Router Table in addition to a separate 21” Solid Filler Table, each of which come with hardware for attachment directly to the rails. Typically both of these tables get mounted on the right side of the saw but can be re-arranged to move the router opening. The combined total of 53” in length provides optimum support for large sheet goods.
For the left side, a separate 28” x 21” Woodpecker Router Table takes the place of the saws standard extension wing. By configuring your saw with two separate router tables, you can reduce the setup time required for multi bit operations like rail and stile routing as well as provide much greater support for sawing large sheet goods.
The 9-1/4 x 11-3/4 opening of the router tables will fit any Woodpecker router mounting plate or lift (sold separately).
This package also includes the support legs for increased stability of the two tables and the 92” rails on the right side of the saw. Legs are not typically needed on the left side.