LPT Fence

Woodpeckers new 32” LPT FENCE is specifically designed for relatively short cut off operations. It's simple, easy to install and effective at delivering a high level of repeatability. The front, vertical face of the fence is engraved with inch scales running in both directions. So whether you install it to the left or the right of the saw blade, you'll have a scale to work with.

An advantage to inch scales on the front face is for quick stock alignment. In many cases, a stop isn't necessary for the cutting task. In those cases, the end of the material can quickly be lined up with the scale mark and you're ready to make the cut.

The ¾” L-STOP included with each fence secures firmly to a T-Slot in the top of the fence. In most applications, such as with a chop saw or cross cut sled, one LPT FENCE and one ¾” L-STOP would be used on each side of the cut. Each 32” LPT FENCE comes with (1) one ¾” L-STOP and (2) two LPT BRACKETS. These brackets allow you to easily adjust the fence left to right for calibration purposes.