logo
eclub
Untitled Document
 

Incra Jig Measuring Rules

incra rulers

Our INCRA Marking Rules, T-Rules, Bend Rules, Centering Rules, and Protractors may look like ordinary rulers, but take a closer look and you will see micro-fine marking holes and slots at every scale position to instantly locate a sharp pencil point or scribe exactly where you want it. No more squinting as you try to line up your pencil on that blur of lines alont the edge of your old steel rule. Even when the lighting is less than perfect, or your eyes are tired at the end of the day, you can effortlessly place your mark precisely on target with zero uncertainty and no eye strain. Who would have thought there was so much room for improvement in the common ruler.

INCRA T-Rules are easy to use, versatile, and precise. Exact measurements are accomplished with scale positions in every 1/16", 1/32", and 1/64". The built-in precision this rule offers shows up in your finished work.The INCRA Bend Rule is what you need for layout and measurement along the edge of a board or other workpiece. The 90º shape holds it snugly in place while the two scale surfaces let you mark and measure on the top, edge, and corners simultaneously. There are even two vertical end scales with marking holes for drawing precision parallel lines relative to the edge of your work.Our Centering Rule boasts micro-fine top and bottom guide holes every 1/32" let you plot perfectly symmetrical marks from the exact center of any workpiece up to 12 wide. A built-in protractor has guide slots to position your mark exactly at every 45º, 30º, 22.5º, and 5º interval.

With guide holes at every 45º, 30º, 22.5º, 5º, 1º, and 0.5º interval, the Marking Protractor can plot any angle with ease and absolute accuracy. A metal T-Bar and see-through crosshairs provide exact alignment against the edge of your workpiece. Remove the T-Bar to work on flat surfaces or to use the 6 centering scale. FOUR angle scales: 0º left to 180º right, 180º right to 0º left, 0º top to 90º left and right, and 90º top to 0º left and right suit every need.

marking rule
The Precision Marking Rule boasts micro-fine marking holes and slots at every scale position to instantly locate a sharp pencil point or scribe exactly where you want it. You can effortlessly place your mark precisely on target with zero uncertainty and no eye strain. Available in 6", 12", or 18".

bend rule
The Incra Bend Rule is precisely what you need for layout and measurement along the edge of a board or other workpiece. Incra put micro-fine marking holes at every scale line. The 90 degree shape holds it snugly in place while the two scale surface lets you mark and measure on the top, edge, and corners simultaneously! Available in 6", 12" & 18".

t rule
The Precision T-Rule is easy to use, versatile, and precise. Micro-fine marking holes and slots at every 1/16", 1/32", & 1/64" scale position. This guarantees that the precision built into the Incra T-Rule actually shows up in your finished work!
(Pro-T Rule 1/16", 1/32", 1/64", 1/100" and Metric).

protractor
This Marking Protractor has micro-fine guide holes at every 45, 30, 22.5, 5, 1, and 0.5 degree interval to plot any angle with ease and absolute accuracy. A metal T-Bar & see-through crosshairs provide exact alignment against the edge of your workpiece. Remove the T-Bar to work on flat surfaces or to use the 6" centering scale.

centering rule
The Precision Centering Rule has micro-fine top and bottom guide holes every 1/32" to let you plot perfectly symmetrical marks from the exact center of any workpiece up to 12" wide. A built-in protractor has guide slots to position your mark exactly at every 45, 30, 22.5, and 5 degree interval.

 

   
3" Tiny T-Rule
Incra products may take up to 2 weeks for shipment.

$15.95
TINYT03
3" Tiny T-Rule (16ths, 32nds & 64ths)
Quantity

   
Incra 10" Decimal Metric Rule
Incra products may take up to 2 weeks for shipment.

$22.95
RULDM10
Quantity

   
Incra 12" Bend Rule
Incra products may take up to 2 weeks for shipment.

$26.95
BNDRUL12
Quantity

   
Incra 12" Center Rule
Incra products may take up to 2 weeks for shipment.

$25.95
CENTER12
Quantity

   
Incra 12" Marking Rule
Incra products may take up to 2 weeks for shipment.

$22.95
RULE12
Quantity

   
icon12inchruleset.jpg Incra 12" Precision Rule Set
Incra products may take up to 2 weeks for shipment.

$84.95
IRSET12
Set includes: 12" Marking Rule,
12" Bend Rule & 12" T-Rule
Quantity

   
icon12inchruleset.jpg Incra 12" Pro Rule Set
Incra products may take up to 2 weeks for shipment.

$89.95
TDPROTSET12
Set includes: 12" Marking Rule, 12" Bend Rule & 12" Pro T-rule

Quantity

   
Incra 12" Pro T-Rule
Incra products may take up to 2 weeks for shipment.

$44.95
TDPROT12

12" Pro T-Rule (16ths, 32nds, 64ths, 100ths & Metric)
test

Quantity

   
Incra 12" T-rule
Incra products may take up to 2 weeks for shipment.

$39.95
T-RULE12
12" T-Rule (16ths, 32nds & 64ths)

Quantity

   
Incra 150 mm Metric Bend Rule
Incra products may take up to 2 weeks for shipment.

$19.95
BND150M
Quantity

   
Incra 150 mm Metric Rule
Incra products may take up to 2 weeks for shipment.

$14.95
RULE150M
Quantity

   
Incra 150 mm Metric T-Rule
Incra products may take up to 2 weeks for shipment.

$22.95
T-RULE150M
Quantity

   
Incra 18" Bend Rule
Incra products may take up to 2 weeks for shipment.

$39.95
BNDRUL18
Quantity

   
Incra 18" Marking Rule
Incra products may take up to 2 weeks for shipment.

$34.95
RULE18
Quantity

   
icon12inchruleset.jpg Incra 18" Precision Rule Set
Incra products may take up to 2 weeks for shipment.

$114.95
IRSET18
Set includes: 18" Marking Rule, 18" Bend Rule & 18" T-Rule
Quantity

   
Incra 18" T-rule
Incra products may take up to 2 weeks for shipment.

$49.95
T-RULE18
18" T-Rule (16ths, 32nds & 64ths)

Quantity

   
Incra 300 mm Metric Bend Rule
Incra products may take up to 2 weeks for shipment.

$26.95
BND300M
Quantity

   
Incra 300 mm Metric Rule
Incra products may take up to 2 weeks for shipment.

$22.95
RULE300M
Quantity

   
Incra 300 mm Metric T-Rule
Incra products may take up to 2 weeks for shipment.

$39.95
T-RULE300M
Quantity

   
Incra 6" Bend Rule
Incra products may take up to 2 weeks for shipment.

$18.95
BNDRUL06
Quantity

   
Incra 6" Marking
Incra products may take up to 2 weeks for shipment.

$14.95
RULE06
Quantity

   
Incra 6" Precision Rule Set
Incra products may take up to 2 weeks for shipment.

$51.95
IRSET06
Set includes: 6" Marking Rule, 6" Bend Rule & 6" T-Rule
Quantity

   
icon12inchruleset.jpg Incra 6" Pro Rule Set
Incra products may take up to 2 weeks for shipment.

$57.95
TDPROTSET06
Set includes: 6" Marking Rule, 6" Bend Rule & 6" Pro T-Rule
Quantity

   
Incra 6" Pro T-Rule
Incra products may take up to 2 weeks for shipment.

$28.95
PROT06

6" Pro T-Rule (16ths, 32nds, 64ths, 100ths, & Metric

Quantity

   
Incra 6" Protractor
Incra products may take up to 2 weeks for shipment.

$34.95
PROTRAC06

Quantity

   
Incra 6" T-Rule
Incra products may take up to 2 weeks for shipment.

$22.95
T-RULE06
6" T-Rule (16ths, 32nds, 64ths)
Quantity

   
Incra 6" x 3" XY Layout Rule
Incra products may take up to 2 weeks for shipment.

$36.95
XY0603
Quantity

   
icon_PKTRUL03 Incra Precision 3 x 2 Pocket Rule
$11.95
PKTRUL03
Measures exactly the same as a standard business card or 2" by 3.5". It offers Incra's patented marking holes at every 1/16th and 1/32nd from 0 to 3 inches.
Quantity